CAMRIS

CAMRIS Billing System Page

The CAMRIS Billing system (aka, 'PBR system') was created by the UPENN Path BioResources Team to streamline and automate much of our billing/fiscal tasks. This system provides our end users with a self-serve mechanism to change fund #s for their existing CAMRIS-serviced protocols, as well as view invoices (past and present), and add in study staff that assist with subject scheduling or Lab Manager duties for their MRI research studies through CAMRIS.

The CAMRIS PBR System is to be managed by the following study team members:

  • Principal Investigator
  • Lab Manager (if PI approves) 
  • Business Administrator of the PI's Department 

Below are quick directions on how to add in a fund#, and how to add in study staff to the system so those individuals can block time on the CAMRIS calendar for study protocols.

Not sure why you cannot schedule a time slot on the calendar?
Use this PBR Checker Tool to see the current status of a protocol in our billing system:  
PBR Checker Tool Link
 

Principal Investigators
Adding
 a Funding Source to a CAMRIS Protocol

  1. Click on: https://pathbio.med.upenn.edu/pbr/portal/
  2. PIs: on the left click PI_Principal Investigator (first link under Project Management)
  3. Select the PI name, and select “List Projects”
  4. See the area titled “Projects” in the middle of the page –this is where you would enter the 26-digit account#, and once that is done…
  5. On this PI Management page, hover over Additional Management Tools (Lt. Blue bar) at the top of the page
  6. Click on CAMRIS Protocols (yellow bar) —No other link is to be clicked here except for ‘CAMRIS Protocol’
  7. Find the IRB protocol # in question and use the white pulldown to search for the fund# you just entered, select it, and click ‘Submit’ at the bottom of page)   

Principal Investigators
Adding Study Team Members to a CAMRIS Protocol

  1. Click on: https://pathbio.med.upenn.edu/pbr/portal/
  2. PIs: on the left click PI_Principal Investigator (first link under Project Management)
  3. Select the PI name, and select “List Projects”
  4. On PI Management page, hover over Additional Management Tools (Lt. Blue bar) at the top of the page
  5. Click on CAMRIS Protocols (yellow bar) —No other link is to be clicked here except for ‘CAMRIS Protocol’
  6. Click on the IRB protocol # you want to amend
  7. A pop-up will show all study team members listed on that protocol (some came from the initial IRB application)
  8. If you want to add additional staff to the protocol, add his/her pennkey and click on Add New Member *

*To delete someone, click on the red “x”. If there is no red ”X” then you must amend the IRB protocol to remove that study person (some staff were auto-added from the initial IRB submission).

 

Lab Managers

Adding Study Team Members to a CAMRIS Protocol

  1. Click on: https://pathbio.med.upenn.edu/pbr/portal/
  2. Click on Lab Manager link, choose your PI from the list & select which study you need to amend
  3. Select the PI name, and select “List Projects”
  4. On Lab Management page, hover over Additional Management Tools (Lt. Blue bar) at the top of the page
  5. Click on CAMRIS Protocols (yellow bar) —No other link is to be clicked here except for ‘CAMRIS Protocol’ Click on the IRB protocol # you want to amend
  6. A pop-up will show all study team members listed on that protocol (some came from the initial IRB application)
  7. If you want to add additional staff to the protocol, add his/her pennkey and click on Add New Member*

*To delete someone, click on the red “x”. If there is no red ”X” then you must amend the IRB protocol to remove that study person (some staff were auto-added from the initial IRB submission).

 

Lab Managers
Adding
 a Funding Source to a CAMRIS Protocol

  1. Click on: https://pathbio.med.upenn.edu/pbr/portal/
  2. PIs: on the left click Lab Manager (link found under Project Management)
  3. Select the PI name, and select “List Projects”
  4. On PI Management page, hover over Additional Management Tools (Lt. Blue bar) at the top of the page
  5. Click on CAMRIS Protocols (yellow bar) —No other link is to be clicked here except for ‘CAMRIS Protocol’
  6. Find the IRB protocol # in question (if the fund is not associated with the protocol, there will be a note highlighted in yellow that says “No funding source assigned”. If you see your desired fund in the pull-down menu next to it, select it and click on ‘Submit’ at the bottom of page)   
                  --If not, have your Business Administrator enter the fund# first, then try the above steps again after refreshing your page.

 

Business Administrators
Adding
 a Funding Source to a CAMRIS Protocol

  1. Click on: https://pathbio.med.upenn.edu/pbr/portal/
  2. PIs: on the left click BA_Business Administrator (link found under Project Management)
  3. Select the PI name, and select “List Projects”
  4. See the area titled “Projects” in the middle of the page –this is where you would enter the 26-digit account#, and once that is done…
  5. On this PI Management page, hover over Additional Management Tools (Lt. Blue bar) at the top of the page
  6. Click on CAMRIS Protocols (yellow bar) —No other link is to be clicked here except for ‘CAMRIS Protocol’
  7. Find the IRB protocol # in question and use the white pulldown to search for the fund# you just entered, select it, and click ‘Submit’ at the bottom of page)   

 

Business Administrators

Adding Study Team Members to a CAMRIS Protocol

  1. Click on: https://pathbio.med.upenn.edu/pbr/portal/
  2. PIs: on the left click BA_Business Administrator (link found under Project Management)
  3. Select the PI name, and select “List Projects”
  4. On PI Management page, hover over Additional Management Tools (Lt. Blue bar) at the top of the page
  5. Click on CAMRIS Protocols (yellow bar) —No other link is to be clicked here except for ‘CAMRIS Protocol’ Click on the IRB protocol # you want to amend
  6. A pop-up will show all study team members listed on that protocol (some came from the initial IRB application)
  7. If you want to add additional staff to the protocol, add his/her pennkey and click on Add New Member *

*To delete someone, click on the red “x”. If there is no red ”X” then you must amend the IRB protocol to remove that study person (some staff were auto-added from the initial IRB submission).

 

© The Trustees of the University of Pennsylvania | Site best viewed in a supported browser. | Report Accessibility Issues and Get Help | Privacy Policy | Site Design: DART Web Team.